remote control from the Aeronic air conditioner

Instructions for the remote control from the Aeronic air conditioner

Air conditioners from the company Aeronik confidently occupy their position among the budget devices for the home. The air conditioner is supplied with a remote control, with which you can configure the operating mode of the device. In this article, we will give a simple instruction to the remote control.

Button designations

ON/OFF. A button that allows you to turn the air conditioner on or off.

MODE. The button responsible for selecting the operating mode of the air conditioner. Each time you press the button, different modes are switched in turn: automatic (AUTO), cooling (COOL), dehumidification (DRY), heating (HEAT).

SLEEP. Enabling night mode. In this mode, the air conditioner is quieter than usual, and also lowers the temperature by several degrees, which improves the quality of your sleep.

air conditioner operating modes

FAN. Responsible for turning on ventilation. Not ventilation, but ventilation. The effect is similar to that of a normal fan.

CLOCK. A button that allows you to set the time as on a regular watch. The adjustment is made using the «+» and «-»buttons.

LIGHT. It is responsible for turning on/off the lighting on the wall unit of the air conditioner.

TEMP. It is responsible for displaying the current temperature set from the remote control. By default, the display shows the room temperature.

symbols on the remote control кондиционера

TURBO. Responsible for enabling the accelerated operation mode. If you want to quickly cool or heat the room, use this mode.

«+» and «-». These buttons are responsible for adjusting various parameters; increasing / decreasing the temperature, setting the time and timer.

SWING. It is responsible for regulating the air flow. When pressed, the blinds begin to move, and when pressed again, they will lock in the position in which they were at the time of pressing the button.

TIMER ON/TIMER OFF. Responsible for setting the timer. After pressing for a few seconds, you can set the timer time by pressing the «+» and «- » buttons. When you click the button again, the specified settings are saved.

I FEEL. It is responsible for automatic intelligent selection of the operating mode.

Quick setup

  1. Press the «ON» or «ON/OFF» button to turn on the air conditioner;

  2. To select the operating mode, press the «MODE» button. With each press, the operating mode will be changed alternately (automatic, cooling, dehumidification, heating);

  3. Use the «+» and «-» buttons to set the desired temperature;

  4. Adjust the air flow direction by pressing the «SWING» button .»;

  5. Configure additional functions, if necessary. Turn on the ventilation by pressing the » FAN » button, night mode («SLEEP» button), acceleration mode («TURBO» button), turn on/off the backlight («LIGHT» button), set the timer with the «TIMER ON»button.

We hope this article was useful to you. Good luck!

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *