Ballu DG11H1-01(E)

Instructions for the Ballu DG11H1-01(E) remote control for the air conditioner

If your Ballu air conditioner comes with a Ballu DG11H1 01 E remote control, you probably have several questions at once. How to use this remote control? How to use it to set up a split system? What nuances to consider? The answers to these questions can be found in the instructions for the remote control below.

Details about each button

instructions for the Ballu remote control

  1. The button for turning the air conditioner on and off. Press once to turn the machine on, and a second time to turn it off;

  2. The «MODE» button, which is responsible for selecting the operating mode. Click on it until you select one of the optimal modes;

  3. «FAN SPEED» button. You can use it to adjust the fan speed. Each time you press it, the speed will increase in the following order: automatic («Auto») high («High»), medium («Med»), low («Low»);

  4. Temperature increase button. You can also use them to set the time in the «Clock» and «Timer» modes;

  5. Temperature reduction button. You can also use them to set the time in the «Clock» and «Timer» modes;

  6. The «SMART» button is responsible for enabling intelligent automatic operation. In this mode, the air conditioner chooses the optimal mode, including the temperature;

  7. The «SWING» button is responsible for setting up the blinds located in the wall unit. After one click, the blinds will start moving up and down. At the same time, you will feel how the direction of the air flow changes. When pressed again, the blinds will lock in their position.;

  8. The «SLEEP» button is responsible for turning night mode;

  9. The «Dimmer» button turns off the display light on the air conditioner unit. You can press any other button to turn on the display;

  10. The «CLOCK» button is responsible for setting the time. Used in combination with buttons 4 and 5 (see above);

  11. The «OFF TIMER» button is responsible for setting the timer turn off the air conditioner. Adjustable by buttons 4 and 5 (see above); — to enable the timer setting mode: «ON» mode for setting the air conditioner turn-on time, «OFF» mode for setting the air conditioner turn-off time.

  12. The «ON TIMER» button is responsible for setting the timer for turning off the air conditioner. Adjustable by buttons 4 and 5 (see above);

  13. The «SUPER» button turns on the mode of intensive operation of the air conditioner. It works only in cooling mode, but in some models it can also work in air heating mode;

  14. The «MUTE» button is required to turn on and off the audio signals;

  15. «I FEEL» button turns on and off the operating mode, in which the air conditioner itself adjusts the operating mode, based on the location where the control panel is located;

  16. The «TEMP SWITCH» button shows the room temperature when you press it for the first time, and the temperature you set when you press it again;

  17. The «SOFT» button is required to turn on and off the power-saving mode.

Results

We hope this quick guide to using the remote control was useful for you. The instructions for the Ballu air conditioner, of course, are significantly more than for the remote control. But we talked about the most important thing, so that you have the opportunity to quickly and easily set up a split system, without going into additional nuances. Good luck!

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *