Does the air conditioner dry the air

How to turn on the air conditioner from the AUX brand

If you do not have the instructions at hand after buying a split system, use this article to turn on the AUX air conditioner. Here we briefly and clearly explain how to set up the device using the remote control.

Quickly enable and configure

Button designation

  • ON/OFF button

The most important button that is responsible for turning the air conditioner on and off. If you press it once, the device will turn on, and if you press it a second time, it will turn off;

  • MODE button

The second most important button is required to select the operating mode. It works sequentially, i.e. after each press, one of the modes will be set: auto, cooling, heating, dehumidification, ventilation. Press this button until you select the optimal operating mode;

  • HEAT button

Use this button to quickly turn on the air heating mode. If you press it once, the mode will turn on, and if you press it a second time, it will turn off;

  • COOL button

Use this button to quickly turn on the air cooling mode. If you click once, the mode will turn on, and if you click a second time, it will turn off;

  • SPEED button

If you have previously selected the ventilation mode, adjust the fan speed using the «SPEED» button. It works on the same principle as «MODE», only when pressed sequentially, the rotation speed will increase;

  • ┿ or ▲ button

Use this button to increase the temperature by 1 degree;

  • — or ▼ button

Use this button to reduce the temperature by 1 degree;

  • U/D SWING or ► button

The air conditioner has special guides (so-called «blinds»), with which you can adjust the direction of air flow. This button is responsible for adjusting the vertical guides. Click on it once. You will see and hear that the blinds have started moving. Press the button again to lock them in their position.;

  • L/R SWING button or ◄

There are also horizontal guides in the air conditioner. They are configured according to the same principle as the vertical ones (see above «U/D SWING button or ►»);

  • TIMER button

It is responsible for setting the timer for turning on the air conditioner. Press once, and use the ┿ or ▲/— or ▼ buttons to adjust the clock.

  • OK button

Responsible for confirming the selection. For example, after setting the timer, you need to click » OK » to save the settings.

Instructions

air conditioner diagram

If you do not want to understand the many functions, use this simple guide to quickly and easily set up the air conditioner:

  1. Make sure that the air conditioner is connected to the mains;

  2. Point the remote control towards the machine and press the «ON/OFF» button 1 time. You should hear a distinctive sound, as well as see the green LED on the air conditioner body. This means that the machine is turned on and ready for operation;

  3. If you want to turn on the cooling mode, press the «COOL» button. If you need the air heating mode, press » HEAT»;

  4. Use the ┿ or ▲/— or ▼ buttons to adjust the temperature. By default, the cooling mode is set to 25 degrees;

  5. Next, adjust the direction of the air flow. For most users, only vertical adjustment is sufficient. The «U/D SWING» or ►button is responsible for this. Press 1 time to make the guides move up and down. Press a second time to lock them in their position.

This is a basic setup. If you want to set the dehumidification or ventilation mode, as well as set the timer, study the button designations. In the article above, we talk about this in detail.

We hope this article was useful for you. In the comments below, you can tell about your experience setting up a split system, as well as share your impressions of using the air conditioner AUX. Good luck!

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *